[DMCForum] Re: announcemt
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DMCForum] Re: announcemt
- From: "Joe OBrien" <joeyoseppijoe@xxxxxxxxx>
- Date: Fri, 13 Aug 2004 05:18:27 -0000
Congratulations,
Now the fun begins.
Joe
--- In DMCForum@xxxxxxxxxxxxxxx, "Lauren" <LPLand@xxxx> wrote:
>
>
> <clink clink> I have an announcement to make :))
>
> <tap tap> is this thing on?
>
> I just drove 10440 home <sounds of joy>!!!!!!!
>
> The two basics that needed attention are fixed
>
> (1) it didn't overheat
>
> (2) it slides into first like <insert noun of choice> slathered
with
> vaseline. Turns out the lower rubber boot was "squished" into the
> linkage and a cable was loose.
>
> Beyond that, it purrs like it always did, and looks great.
Someone at
> the garage decided to shampoo the carpets and clean the exterior
> for me - thanks!!. They also r/r'd the rear plate that holds the
> taillights, repainted it, and replaced all the missing screws as
well
> as re-mounting the loose (read that as unbolted) bottom trim.
These
> guys were awesome - they wanted to return it to me looking as good
> as it sounds.
>
> Some of what was done in the last 2 1/2 months:
>
> - replaced all the hoses (thanks, John for all your help!!!!)
> - replaced water pump
> - installed John's fan fix to replace Sean's funky switch
> - re-cored radiator
> - rebuilt alternator
> - fabricated replacement for broken xmission mount
> - replaced fuel sending unit (turns out my guage is broken)
> - remounted loose idle-speed control
> - "tidy-up" rigged wiring
> - charged A/C with Fr12
>
> I still need to address the seats, dash and binnacle, and in good
> time I will. For now the only real other problem I have is that
the
> driver's window wants to fall off the track.
>
> I'll make this part one of two, so more to come -------------------
------->
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN