[DMCForum] Re: Ok, one LAST thing, Ryan =P

["ryanpwright" <yahoo1@xxxxxxxxxxxxxx>]

Ah, I wish I could make it to PF, but not this year. Perhaps another
time. :)

-Ryan

--- In DMCForum@xxxxxxxxxxxxxxx, Enid/Jeremiah
<hispanicangeleyes@xxxx> wrote:
> Awesome Ryan!  Glad things are working out!  Hope to
> see you Thursday!
> 
> 
> --- ryanpwright <yahoo1@xxxx> wrote:
> > FYI... I plugged this in, plugged the mixture
> > adjustment hole, and the
> > car started right up. Just as good as the day I
> > bought it, actually a
> > little better due to the new plugs, etc. Still seems
> > slightly rough
> > and still does the "glugglugglug" when I let off the
> > throttle (but
> > only when warm), so I'm going to try adjusting the
> > mixture tonight, as
> > well as the timing, and anything else I can come up
> > with. I'm making
> > progress, and she's drivable again. :)
> > 
> > -Ryan
> > 
> > --- In DMCForum@xxxxxxxxxxxxxxx, "ryanpwright"
> > <yahoo1@xxxx> wrote:
> > > LOL!! Jeremiah, thank you for all of the excellent
> > information. You
> > > know what's funny, I looked all over the engine
> > compartment and didn't
> > > even see that "T" sitting there loose like that.
> > If I had, it would
> > > have been obvious where it goes. The flash of the
> > camera illuminated
> > > everything a lot better than my flashlight!
> > > 
> > > Sweet. I'm going to hook that back up tonight (&
> > the big hose from the
> > > intake to the oil cap (is that the oil cap?) that
> > I disconnected for
> > > the picture). Also, thank you for the link to the
> > diagram and thank
> > > you to John Hervey for keeping information like
> > this so handy.
> > > 
> > > I wonder how much of this was disconnected before
> > (being compensated
> > > for with the brass screws) and how much I
> > disconnected while doing the
> > > tuneup. 
> > > 
> > > -Ryan
> > > 
> > > --- In DMCForum@xxxxxxxxxxxxxxx, Enid/Jeremiah
> > > <hispanicangeleyes@xxxx> wrote:
> > > > I just looked at the picture of the Delay Valve
> > > > (http://www.ryanwright.com/temp/vaccumn.jpg). 
> > You
> > > > have the whole "T" structure I was describing
> > right
> > > > there in the picture.  It is just unhooked; it
> > looks
> > > > completely intact - it's just not hooked up to
> > that
> > > > hose on the delay valve.  Hook that sucker up
> > man,
> > > > that will probably solve a good bit of your
> > problems. 
> > > > Sorry for so many messages; I'm just so excited
> > to
> > > > finally help someone else for >
> > > > 
> > > > OH and hey - kudos to your car from your
> > website.  It
> > > > looks really nice!
> > > > 
> > > > Jeremiah (and that is my final answer; I'm going
> > to
> > > > bed now =P)
> > > > 
> > > > 
> > > >       
> > > >             
> > > > __________________________________
> > > > Do you Yahoo!?
> > > > Friends.  Fun.  Try the all-new Yahoo!
> > Messenger.
> > > > http://messenger.yahoo.com/
> > 
> > 
> 
> 
> 
>             
> __________________________________
> Do you Yahoo!?
> Take Yahoo! Mail with you! Get it on your mobile phone.
> http://mobile.yahoo.com/maildemo

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.