RE: [DMCForum] More B28E/F

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Wilhelm,
I noticed in the picture the control plunger was out of the distributor. If
I were you I would put it back in and put a rubber band around the
distributor to hold it in. If it get a scratch or damage on it then it's
trash. The best place to keep them is in the distributor.
John Hervey





  -----Original Message-----
  From: Wilhelm Starberg [mailto:wilm@xxxxxxxxxxxx]
  Sent: Tuesday, May 18, 2004 12:46 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: [DMCForum] More B28E/F


  Hello again,

  Since my engine setup is somewhere between F and E, I will
  try to remove the F stuff and go E all the way.

  I did some digging in my old boxes in the garage, and found some
  stuff I might be able to use:

  A CPR and a fuel distributor, the CPR is type 038, and
  the fuel distributor a 037 type, I also found the air metering unit
  where the fuel distributor once sat.

  Pictures of the goodies here:
  http://home.broadpark.no/~wstarber/dmc/engine.html

  Is the 037 a Porsche distributor?
  Would this be ok for an E setup?


  I have seen that DeLorean motors in UK converts from F to E version
  for 700£, to bad they are located so far from me...anyway, this
  is what they do:
  (from http://www.delorean.co.uk/DMUK/upgrades.html)

  "We offer the service of upgrading the engine to the UK equivalent.
  This involves replacing the fuel metering head, control pressure
  regulator, ignition distributor, re piping the vacuum system."

  Do you really have to replace the ignition distr.? anyone
  knows why?
  The timing is different, sure, but is not that adjustable?
  I'm looking forward to check my timing, wonder how it's tuned...

  Vacuum system, does anyone know a of car with the setup I am looking
  for - so I can copy that?



  Thanks for all the help I've gotten so far.

  Regards,
  Wilhelm S.
  #10816




        Yahoo! Groups Sponsor
              ADVERTISEMENT





----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.