[DMCForum] Re: Time for my fuel system fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Time for my fuel system fix



Oops. I used vasoline according to the directions I was reading. Just
a tiny bit, though... Ah well. If it eats the rubber away I'll just
have to buy a new piece.

-Ryan

--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> wrote:
> DON'T use a petroleum based lube. Silicone is the lube of choice
> otherwise the rubber will dissolve
>
> Martin
>
> Dave Stragand wrote:
>
> > Did it.  It's a five minute job.  It's fairly simple inside.
Clean and lube
> > more than rebuild...
> > 
> > -Dave
> >
> > -----Original Message-----
> > From: cruznmd [mailto:racuti1@xxxx]
> > Sent: Friday, May 07, 2004 8:53 AM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] Re: Time for my fuel system fix
> >
> >
> > Ryan,
> >
> > How hard was it to rebuild the mode switch? How hard is it to remove
> > it and keep all of the electrical and vacuum lines straight?
> >
> > Rich A.
> > #5335


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated