Re: [DMCForum] Re: Bearing and Transmission questions, partiallyfor Martin G:

[Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>]

Well between those of us who were ragging DMCH's "green" car down the 
Houston raceway, we managed to break said pin. A lot of D's have trouble 
shifting into second, and I've heard it's all down to this roll-pin. It 
makes second feel very vague "like stirring porridge" said Dave, and on 
the car we've just pulled the engien and tranny out of, you could go 
from 1st to 2nd, but not 3rd to 2nd, as you say.

Martin

cruznmd wrote:

>I have replaced -one- wheel bearing...passenger side. I thought that 
>was where the noise was coming from. I was wrong. :)
>
>I have another bearing coming for the driver's side. I hope that's it.
>
>I did not know about the roll pin for 2nd gear. I sometimes find the 
>tranny difficult to downshift into 2nd gear, so I usually don't. It 
>up-shifts into 2nd, smoothly. Thanks for the info.
>
>I'm pretty gentle on the tranny.
>
>Rich
>  
>
>  
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.