RE: [DMCForum] question about the orientation of the air inlet
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] question about the orientation of the air inlet



Kenneth,
What your working on is the throttle body and in the rest position ( at
Idle ) the butterflies as they are called should be closed. Here is a link
to the front of an engine with the front w pipe off.
John Hervey
http://www.specialtauto.com/delorean-images/throttle-body.jpg

  -----Original Message-----
  From: ken@xxxxxxx [mailto:ken@xxxxxxx]
  Sent: Monday, March 08, 2004 3:26 PM
  To: dmcnews@xxxxxxxxxxxxxxx; dmcforum@xxxxxxxxxxxxxxx
  Subject: [DMCForum] question about the orientation of the air inlet


  I am putting back together my air intake system. and am wondering

  The 2 round brass plates with small spring loaded vents that are in the
air
  intake

  Which way should the spring loaded vents face?

  Up or down?

  I have put a picture of the piece here

  http://www.odoc.ca/images/MVC-045F.JPG

  Please let me know

  Thanks
  Kenneth
  005541



  [Non-text portions of this message have been removed]



----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated