Re: [DMCForum] Re: grady taillight board???

[Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>]

I haven't met an OEM board that couldn't be made to work with a bit of 
sand paper and several blobs of solder. Grady's are no good for us over 
here because of the need to wire up foglights, and the bulbs are all 
wired "backwards" ie where the housing is +12v and the centre pin is 
ground (I know this is case on a very similar aftermarket board, not 
100% it's the same on Grady's)

Martin

Shannon Yocom wrote:

>Ditto.
>Well except for the "5 years ago" part. And the "when I fist got my car" part.
>Other than that I would say the same about the boards ;-)
>
>The boards were the only thing that solved my "hiper-blink" problem in cooler
>weather before the car warmed up. I tried cleaning, cleaning with vinegar,
>file'n, dremmel'n, sand paper'n, even the teeny-tiny screw trick... nothing. So I
>gave in and sprung the cash. Bam! Problem solved. And to boot my lights are
>brighter.
>
>I like 'em.
>
>Shannon Y
>16506
>  
>
>  
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.