[DMCForum] FW: Blasted RUST!

[<ken@xxxxxxx>]

Found a solution . perhaps it can work for anybody else
 
A 200 lb polish guy
 
Took him literally 5 minutes 
 
Maybe it was all the that penetrating oil I soaked it with . then he just
got lucky :-)
 
Ken
005541
www.odoc.ca <http://www.odoc.ca/> 
 
 
 
 
 
Subject: Re: Blasted RUST!
 
Use a hotter torch...  Or cut it off with a grinder.
 
 
Andrei
 
 
 
----- Original Message -----
From: <ken@xxxxxxx>
To: <dmcforum@xxxxxxxxxxxxxxx>; <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, March 01, 2004 2:40 PM
Subject: [DMCForum] Blasted RUST!
 
 
> I am in the process of remove my old exhaust, EVERYTHING is off and done
> 
> .
> 
> Except! 1 blasted little spacer (I think it's a spacer)
> 
> On the driver side, the manifold has one stud which has a bolt, then the
oil
> dip stick then a spacer?
> 
> Well it seems that this spacer is the only thing holding on . all the
other
> places on the exhaust manifold move when I shake the manifold, except that
> one spot. so I am positive that this it the culprate.
> 
> I drenched it with penetrating oil.  And tried heating it up with a torche
> 
> Nothing seems to want to get this thing to let go
> 
> Any suggestions?
> 
> Thanks
> Ken
> 005541
> www.odoc.ca
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 


[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.