Re: [DMCForum] Blasted RUST!

["Andrei Cular" <andreic@xxxxxxxxxxxxxxxxxx>]

Use a hotter torch...  Or cut it off with a grinder.


Andrei



----- Original Message ----- 
From: <ken@xxxxxxx>
To: <dmcforum@xxxxxxxxxxxxxxx>; <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, March 01, 2004 2:40 PM
Subject: [DMCForum] Blasted RUST!


> I am in the process of remove my old exhaust, EVERYTHING is off and done
>
> .
>
> Except! 1 blasted little spacer (I think it's a spacer)
>
> On the driver side, the manifold has one stud which has a bolt, then the
oil
> dip stick then a spacer?
>
> Well it seems that this spacer is the only thing holding on . all the
other
> places on the exhaust manifold move when I shake the manifold, except that
> one spot. so I am positive that this it the culprate.
>
> I drenched it with penetrating oil.  And tried heating it up with a torche
>
> Nothing seems to want to get this thing to let go
>
> Any suggestions?
>
> Thanks
> Ken
> 005541
> www.odoc.ca
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.