RE: [DMCForum] VIN #0909 pics

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Greg, When the proper hose is used there are no ties. Hear is a picture
showing the space between the belt and the hose. If it's not this amount or
more. The belt bounce will wear into the hose.
John Hervey
http://www.specialtauto.com/delorean-images/coolant-hose-pass.jpg

  -----Original Message-----
  From: timnagin [mailto:timnagin@xxxxxxxxxxxxxx]
  Sent: Sunday, February 22, 2004 6:01 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: RE: [DMCForum] VIN #0909 pics


  Yea, but I am pretty sure the white plastic wire ties holding the hoses
away
  from the belts and stuff was not OEM :)  That, and you can see the bolt
head
  broke off for the throttle spool bracket.

  This is the picture I am referring to -
  http://staff.xu.edu/~durman/delorean/pics/throttle_spool.JPG

  Greg


  -----Original Message-----
  From: DMCVIN6683 [mailto:dmcvin6683@xxxxxxxxx]
  Sent: Sunday, February 22, 2004 5:48 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: Re: [DMCForum] VIN #0909 pics


  The early model deloreans ran a different cooling hose configureation
  before vin #1234.

  Mark



----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.