I guess it was a misunderstanding then. I thought you were referring to the
picture of the compressor showing the coolant lines on the driver's side of
the engine, as if you had not yet seen the other picture. My mistake.
Still, the ones on the passenger side, with the white wire ties, do look to
me as being reengineered.
I know some had different configurations but mine just looks hacked up. What
do you think? Also, something else I have been wanting to find out is when
the throttle spool cover was implemented. It looks like my car has remnants
of that but I think it's too early of a VIN.
Greg
-----Original Message-----
From: DMCVIN6683 [mailto:dmcvin6683@xxxxxxxxx]
Sent: Sunday, February 22, 2004 7:31 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] VIN #0909 pics
Oh i thought you were referring to this quote.... "Some previous owner
did some reengineering with the coolant hoses for sure" Louie even made
a comment about that picture of the hoses..... I didn't know you were
just referring to the plastic zip strips.
Im wrong
Mark
On Sunday, February 22, 2004, at 06:01 PM, timnagin wrote:
> Yea, but I am pretty sure the white plastic wire ties holding the
> hoses away
> from the belts and stuff was not OEM :) That, and you can see the
> bolt head
> broke off for the throttle spool bracket.
>
> This is the picture I am referring to -
> http://staff.xu.edu/~durman/delorean/pics/throttle_spool.JPG
>
> Greg
>
>
> -----Original Message-----
> From: DMCVIN6683 [mailto:dmcvin6683@xxxxxxxxx]
> Sent: Sunday, February 22, 2004 5:48 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: Re: [DMCForum] VIN #0909 pics
>
>
> The early model deloreans ran a different cooling hose configureation
> before vin #1234.
>
> Mark
Back to the Home of PROJECT VIXEN