Re: [DMCForum] Re: Vinyl dye for McCoy

[Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>]

The plasti-cote stuff looks lovely but is a little too light and a 
little too blue to match the seats (at least the ones in my project car. 
My #1 car is black so no problems there!

The rear hub carrier would have to twist quite a lot and bend the 
trailing arm cowlings out of the way before the front end of the arm 
would hit terra firma.

Martin

cruznmd wrote:

>According to the Vixen archives, Plasti-cote #408 is correct for the 
>gray interior cars. Normally available at Pep Boy's etc.
>
>My local Advance Auto quit carrying Plasti-cote. I purchased some 
>Dupli-Color that looks like it might be the same thing. 
>
>To my knowledge, #408 is just a shade of gray. Any vinyl dye that 
>says it's color #408 should do the trick. It doesn't have to be a 
>particular brand.
>
>Re: Trailing arms-
>It's my understanding that the arm can't swing enough to hit the 
>pavement (I could be wrong. Martin? Dave S.?). Be not afraid. Just 
>get checked out and install the Iconel bolts if you haven't already.
>
>I hope this helps.
>
>Rich A.
>
>  
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.