Re: [DMCForum] Fixed Window Seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Fixed Window Seal



I used the 3M urethane to put in a windshield.  It is smelly
sticky nasty stuff.  Once it dries, it is fine.  As an
alternative, I used black RTV to glue in a door window
frame.  It was a lot easier to work with than urethane but
not as solid.  Also looks too glossy, but I sprinkled
activated charcoal (black pigment) over it as it dried which
gave it a nice matt finish.  Once you open the urethane
stuff, it dries out rather quickly.  If you only use it for
a small job then don't expect to save any for later.

Walt



  _____  

Yahoo! Groups Links


*	To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
  

*	To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
<mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
  

*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 


<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated