>uh, was the mineral spirits 8 inches off the ground? No it was on the ground. I measured to the top of the pump outlet. But now that I am thinking about it the hose was in a full gal can which means the pump only had to pull up about 9'. Maybe I should run the spearmint again with a true 10' head. >where do you propose to put the cooler? I'd consider this because the >rotary makes the fuel really really hot. My tank has significant >positive pressure after a short time driving, I assume it's because of >the heating/expansion of the fuel. My chiller block can go anywhere in the line as long as it has room for air to flow over the heat sink. I would make it out of 6061 Al so it can be tapped with any thread you need. Andrei Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/SIG=12c1m85r3/M=267637.4116730.5333196.1261774/D=egro upweb/S=1705126215:HM/EXP=1070557996/A=1853618/R=0/*http://www.netflix.com /Default?mqso=60178338&partid=4116730> click here <http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupm ail/S=:HM/A=1853618/rand=801366075> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN