Hello. I take it back. I used 3/8 inch, but on second thought, I'm unconvinced I'm correct. I'd get a second opinion. If it is 10mm, using a 3/8 inch head like I did would be bad. Rick. --- In DMCForum@xxxxxxxxxxxxxxx, "twinenginedmc12" <twinenginedmc12@xxxx> wrote: > Hello. > > It's 3/8 inch. Have fun! Get help! Don't do it alone. > > Rick. > > --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > > Dave Swingle is the man to ask. It's metric, but I can't remember > the exact > > size. 10MM? > > > > > -----Original Message----- > > > From: jordan rubin [mailto:nuttenschleuder@xxxx] > > > Sent: Thursday, November 20, 2003 3:11 PM > > > To: dmcnewsgroup > > > Subject: [DMCForum] Torsion bar allen size nned asap pleeeze > > > > > > hello > > > > > > does anyone know the size needed for tortion bar > > > adjustment. I believe its allen of hex, cant > > > remember. > > > english or metric? > > > > > > if you know, please let me know as soon as possible. > > > > > > thanx > > > > > > jordan 11613 > > > > > > __________________________________ > > > Do you Yahoo!? > > > Free Pop-Up Blocker - Get it now > > > http://companion.yahoo.com/ > > > > > > > > > To unsubscribe from this group, send an email to: > > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor <http://rd.yahoo.com/SIG=12cqab3pn/M=259395.3614674.4902533.1261774/D=egro upweb/S=1705126215:HM/EXP=1069446914/A=1524963/R=0/*http://hits.411web.com /cgi-bin/autoredir?camp=556&lineid=3614674?=egroupweb&pos=HM> <http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm ail/S=:HM/A=1524963/rand=731503511> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN