Sounds to me like the idlespeed thermistor has become unplugged or failed. Alternatively the computer may have had it. If you have a friend with a DeLorean, it takes 2 minutes to try a different idlespeed computer. it takes a lot longer to replace/fix the idlepseed thermistor! The Idlespeed computer is fixable. Martin ken@xxxxxxx wrote: > >Basically, my mixture screw was adjusted last summer by a garage, when I >had trouble getting the car running again after installing a new >distributor, rotor, wires and plugs. > >Ever since then. the car will run rough when its cold and idle around >850, it honestly sounds like it will STALL if I don't pop the >accelerator once and a while > >Once the car is warm, it idles around 1500 and runs fine > > >What adjustments can I tweak to correct this problem > >As of now, I am 99% sure the timing is correct (checked it with a timing >light) > >As well, the mixture screw is not TOTALLY out of whack, but if I had to >guess it has something to do with this > >Also, the 3 brass screws are not adjusted at all, they are simply >snugged down by hand > > >Thank you >Kenneth >005541 > > > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=251812.4024216.5238180.1261774/D=egroupweb/S=170512 6215:HM/A=1754451/R=0/SIG=11tmlldst/*http://www.netflix.com/Default?mqso=6 0178323&partid=4024216> click here <http://us.adserver.yahoo.com/l?M=251812.4024216.5238180.1261774/D=egroupm ail/S=:HM/A=1754451/rand=478397011> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>