[DMCForum] Removing front impact absorber
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Removing front impact absorber



I'm having a hard time figuring out how to get the front impact absorber
off.  The manual says to remove the 5 bolts holding it on, which seems
easy enough.  The location of the bolts would also seem obvious, with the
5 holes in the front of the absorber.  However, the only thing I see at
the far end of those holes is a flat piece of metal, not a bolt head.  Are
the bolts behind that piece?  And if so, how do I get to them?  I know the
bolts are in there somewhere - I can see them when I look up between the
edge of the foam and the front pontoon.

Any insight would be appreciated - this one has me stumped.

--Josh
#5553


Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512
6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore
dir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=832269578> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated