Re: [DMCForum] Re: Backwards Trailing Arm Bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Backwards Trailing Arm Bolts



Not with the pair I got. Just got a couple washers and a nut each.

content22207 wrote:

>Toby Peterson provided locknuts and jamb nuts. I used both.
>
>Bolts are 19mm 12 point. Used an offset wrench to reach inside frame
>(all my sockets are 6 point).
>
>Net splurge was only $20 (which included shipping BTW).
>
>My factory bolts are nearly 100%. Am going to be very irritated if
>these super bolts bend or snap.
>
>Bill Robertson
>#5939
>
>  
>
>>--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote:
>>    
>>
>>>BTW: did anyone else with Toby bolts find them disconcertingly light?
>>>      
>>>
>>Look and feel like aluminum! In theory are hardest metal ever invented
>>by modern man. Guess I'll find out...
>>
>>You mean you actually splurged and bought Toby-TABs?  Yeah, they do feel
>>lighter than regular bolts, but not as light as aluminum.  I found
>>    
>>
>that they
>  
>
>>could still pick up a very strong magnet.  The Walt-TABs (also
>>    
>>
>Inconel 718)
>  
>
>>that I'm hocking pick up a magnet very slightly better than
>>    
>>
>Toby-TABs.  I
>  
>
>>have a poop sheet on them somewhere that I'll post online (when I
>>    
>>
>can find
>  
>
>>it again).  It gives a list off how much of each element is in the
>>    
>>
>alloy.
>  
>
>>Did you have a problem finding 12 point tools to fit the Toby-TABs?
>>    
>>
> Do you
>  
>
>>feel comfortable not using a lock nut?
>>
>>Walt
>>    
>>
>
>
>
>To unsubscribe from this group, send an email to:
>DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>
>
>
>
>  
>



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=256694.4002236.5216697.1261774/D=egroupweb/S=170512
6215:HM/A=1784493/R=0/id=noscript/SIG=11q7p9e7k/*http://webevents.yahoo.co
m/universal/intolerablecruelty/> 	 
 
<http://us.adserver.yahoo.com/l?M=256694.4002236.5216697.1261774/D=egroupm
ail/S=:HM/A=1784493/rand=845799632> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated