I dont have any write up, but I can tell you I did it and it is no big deal.. The only thing I messed up, was I made my index mark to realign the splines with a marker that came off too eaisily... so I had to do it 3 times to get the steering wheel straight again.. I suggest a wax marker, like "Mean Streak" or something that wont wipe off eaisily. As far as tips go.. I used a screw driver to pry the coupler open a small bit after removing the pinch bolt.. this made the shaft slide out of the coupler eaiser. I think I may have used a bit of liquid wrench here too.. The hardest part of the job was getting the new bushing in to the fire wall! Big pipe and big hammer did the trick. Good luck! --- James LaLonde <deloreandmcxii@xxxxxxxxxx> wrote: > I can't find any tech articles on replacing the > steering column > bushing. I think there was a DeLorean Magizine with > a writeup on it > some time ago... anybody have access to that? Could > you send me a > scan of it? > > Any tips or how-tos you guys know of?? > > Thanks! > James L 4009 > > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1732161/rand=397134927> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN