[DMCForum] Re: Re FelPro valve cover gasket number
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Re FelPro valve cover gasket number



VS26090 is valve cover gaskets only, not a complete engine kit.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> I'll take a look at the Fel-Pro kit I have and get the number off of
there.
> I ended up getting everything for $75 on Ebay. 
> 
> I haven't had any leaks on my covers. The only leak I had was on the
plate
> on the RS head that allows the cam journal to poke out when removing
it from
> the timing chain sprocket. A retorque and all it well with the world.
> 
> > -----Original Message-----
> > From: content22207 [mailto:brobertson@xxxx]
> > Sent: Monday, September 22, 2003 4:33 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] FelPro valve cover gasket number
> > 
> > FelPro number on box is VS26090. Stock item at Autozone. Comes up in
> > computer under Volvo PRV of some ilk (probably 1985 760). They can
> > pull it just by box number.
> > 
> > Think you'll like 'em.
> > 
> > Bill Robertson
> > #5939
> > 
> > >--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx>
wrote:
> > > My kit was for a Volvo 760 GLE, 1983. Which ones are you looking at?
> > >
> > > > -----Original Message-----
> > > > From: content22207 [mailto:brobertson@xxxx]
> > > > Sent: Monday, September 22, 2003 3:30 PM
> > > > To: DMCForum@xxxxxxxxxxxxxxx
> > > > Subject: [DMCForum] FelPro valve cover gasket specs
> > > >
> > > > Checked out a set of FelPro #VS26090 at lunch. Indeed metal
core with
> > > > rubber facings. Not thickest in the world -- about .045" -- but
> > > > imminently better than a piece of paper.
> > > >
> > > > Need metal core because people have tendency to over torque solid
> > rubber.
> > > >
> > > > I have significant mismatch between timing chain cover and
cylinder
> > > > head so seated gasket in a bed of silicone. If doing same
remember you
> > > > need two torqings: one gentle just to flatten silicone, and
one hard
> > > > after it's set up.
> > > >
> > > > Bill Robertson
> > > > #5939
> > > >
> > > >
> > > >
> > > >
> > > > To unsubscribe from this group, send an email to:
> > > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732161/rand=477315240> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated