[DMCForum] "Idle Mixture" vs "Fuel Mixture"

["content22207" <brobertson@xxxxxxxxxxxx>]

Thought you might be an old head just using a familiar term. On
carburetor screw(s) is/are idle mixture (fuel mixture at throttle
determined by metering jets). 

We all knew what you meant. 

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> That's what I meant when I brought it up... mixture adjustment. I got my
> terms mixed up.
> 
> > -----Original Message-----
> > From: Martin Gutkowski [mailto:webmaster@xxxx]
> > Sent: Wednesday, September 17, 2003 2:54 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: Re: [DMCForum] Idle adjustment tool question
> > 
> > If you go into a model shop that sells japanese RC cars, you can buy
> > some really neat (expensive) screwdriver-style allen keys. I
bought and
> > regularly use a 3mm one for mixture adjustment (NOT idle
adjustment!!!)
> > It's also really handy for getting the mirror switch out without the
> > innards going sproiiiinggg.
> > 
> > Martin
> > 
> > Walter Coe wrote:
> > 
> > >>What size allen wrench is needed to adjust the idle mix screw?
> > >>
> > >>
> > >
> > >Like Samuel said, mine is a long T-handle that was part of a set.
They
> > are
> > >common at Sears, NAPA, Snap-On, etc.  The one you need is a 3mm.  You
> > could
> > >buy just one, but it is really handy to have the whole set.  I
use the
> > 5mm
> > >to get cold start valves off.
> > >
> > >Walt
> > >
> > >
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1706996/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1706996/rand=751014943> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>