Forgot to bring my adjustment tools (have a collection I keep in car, but as you remember drove a REAL car instead). Did bring a folding set of English wrenches. One of the smaller ones fit hex head. Might not have been 100% size, but was close enough to turn. Removed from folding set for access. John Hervey has pic on his website that mentions metric size. Long pattern allen wrenches very common. May have to buy whole set, but IMHO can never have too many tools. I've got at least 4 English and metric sets all mixed together. Usually grab a handful and take to fastener to find one that fits. Will look at wrench at lunch to get size (assuming my Renault air assembly same as DeLo). Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: > What size allen wrench is needed to adjust the idle mix screw? I have all > sizes of metrics but when they get very small they are too short to do the > job. > > Bill, Louie, I know you guys adjusted 10115 when we were at Dave's place but > I didn't check out the tool you were using. > > Where might I acquire a metric allen that long? (I know I could go on a hunt > but if you guys can save me the time I'd be obliged to ye!) Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1732161/rand=306458936> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN