I'm not sure about the D, but I know on my brothers Porsche we were off by 1 tooth on the timeing belt and it wouldn't run propperly. Andrei ----- Original Message ----- From: "cruznmd" <racuti1@xxxxxxxxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Thursday, July 10, 2003 11:10 AM Subject: [DMCForum] New timing chain question > I'm still leaning towards a mis-placed distributor as the reason for > my car not starting (especially in light of new info I received > during a phone call last night). But I have one final question on the > timing chains. > > When installing the chains, at this point, it's irrelevant where the > pistons are in their stroke right? What matters is the marks on the > chain line up with the marks on the cam and crank sprockets. > > I did this exactly as the Book and DMCH said. I was even told you > don't have to be -that- precise as the distributor would be adjusted > to smooth it out. If I was off, then the pistons would strike the > valves. I hand cranked it 4 times to make sure nothing was > interfering, so this has to be correct. > > > > To unsubscribe from this group, send an email to: > DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=170512 6215:HM/A=1663535/R=0/SIG=11ps6rfef/*http://www.ediets.com/start.cfm?code= 30504&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupm ail/S=:HM/A=1663535/rand=228839726> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>