On 03-05-2003 01:57, Walter Coe wrote: > I think something is wrong with Mike's wiring. > With the relay installed, the dash lights are on > whenever the ignition is on. With the jumper > installed, the dash lights don't work at all. > The red relay box is connected properly. I'm thinking the relay might have corroded contacts so you could try another relay... > The problem at the relay appears to be that pin 86 > is never getting power. I think it should have +12V > while the headlights are on? Did you check if the relay socket isn't wired in reverse? Maybe for some reason the power to the coil has been swapped, so the +12V is on the LEFT contact and ground is on the right? Good luck, JAN van de Wouw Thinking Different... Using a Mac... Living the Dream... Driving a DeLorean... #05141 "Dagger" since Sept. 2000 ------------------------------ Yahoo! Groups Sponsor <http://rd.yahoo.com/M=247865.3003379.4507215.1261774/D=egroupweb/S=170512 6215:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1051952175%3e M=247865.3003379.4507215.1261774/D=egroupweb/S=1705126215:HM/A=1482387/R=1 =1051952175%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705126215:HM /A=1482387/R=2> <http://us.adserver.yahoo.com/l?M=247865.3003379.4507215.1261774/D=egroupm ail/S=:HM/A=1482387/rand=268567633> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN