I got my car back together. The brakes feel average for a DeLorean. I was hoping that the SS braded brake lines would make more of a difference. Bleeding the system was a pain, and I still don't have all the air out. I think I could pump another quart of fluid through there and still have some small bubbles. Does anyone have any suggestions for bleeding brakes? I used a clear vinyl tube hooked to the bleed screws. Without it, I would never see the tiny bubbles. These are tiny-tiny, though. I'm using Castrol GTLMA DOT 4. I ran three 12 ounce bottles through there before I realized that I was nearly out and would have to buy more. At this point I would rather use a pressure bleeder. The humidity here is incredible. My brake calipers were dripping wet in my garage. I thought at first I had a leak until I realized that just about everything in the garage was dripping wet -- even the plastic bottles of brake fluid. Walt ------------------------ Yahoo! Groups Sponsor ---------------------~--> DVD Rentals with No Late Fees - Try Netflix for FREE! http://us.click.yahoo.com/abvVKB/pEZFAA/46VHAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN