Re: [DMCForum] OEM Tank sender

["Andrei Cular" <acular@xxxxxxxxxxxxxxx>]

The unit I have from my 74 ghia goes 0 to 100 that is why I had to switch
which wire goes to the terminal on top of the sending unit.  On the type 1
unit it is really easy to change but you have a leaver arm that sticks out
that you need tom position correctly in the tank and bend the arm a bit to
get a correct reading.  But this type two I found is the same style as the
OEM unit out of the D.


Anrei



----- Original Message -----
From: "Walter Coe" <Whalt@xxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Thursday, September 05, 2002 10:52 AM
Subject: Re: [DMCForum] OEM Tank sender


> > You
> > need open it up and make a move a wire and it will work like the a OEM
DMC
> > for about $50.
>
> Andrei,
>
> Does the particular VDO unit you specify give a 0 to 100 ohm range like
the
> OEM?  Or is it 0 to 64 ohm like the TankZilla?
>
> Walt
>
>
>
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Looking for a more powerful website? Try GeoCities for $8.95 per month.
Register your domain name (http://your-name.com). More storage! No ads!
http://geocities.yahoo.com/ps/info
http://us.click.yahoo.com/aHOo4D/KJoEAA/MVfIAA/HliolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>