Jim, The center console vents are NOT supposed to open while switched to "heater". It you want hot/warm air blowing from the center console vents then put it on "vent" and turn the heater control valve to the red area. The difference between "heater" & "vent" modes is how the air is directed -- not in their ability to change air temperature. However, if your center vent isn't opening in any mode then you most likely have a vacuum problem. Try this test: With the engine running turn the fan speed switch all the way down (so you can hear what is going on in the dash). Now turn the mode switch through all its positions and listen for all the vacuum actuated flapper doors to move. If you hear nothing, then you probably have a vacuum hose loose in the engine compartment. If you hear flapper doors moving but still no air through the center vents then you probably have a faulty mode switch or a leaky vacuum actuator. Let us know what you find, Walt > For some reason my air vents in the center console won't open up. The > only thing that has been different lately is that I've been using the > heat. What do I need to do? The mode switch isn't making any hissing > noise at all. ------------------------ Yahoo! Groups Sponsor ---------------------~--> Rent DVDs Online-No late fees! Try Netflix for FREE! http://us.click.yahoo.com/XfSp7B/XlOFAA/46VHAA/HliolB/TM ---------------------------------------------------------------------~-> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN