RE: [DMCForum] great group

["mgutkowski@xxxxxxxxx" <webmaster@xxxxxxxxxxxxxx>]

Denis, they are called Banjo fittings. The ring on the end of the hose is
hollow. The bolt that screws down through the ring is also hollow and has
a
hole in the side. It doesn't matter what orientation they each end up, the
fuel will find its way around the ring, in through the hole in the side of
the bolt and down through the tip of the bolt. Undo one of the fuel lines
on your metering head, you'll see what I mean. Don't lose the copper
washers!

Martin
#1458
#4426

Original Message:
-----------------
  I have a simple question and haven't found it in my manual.  How do 
the fuel injectors connect to the fuel lines.  Do you have to line up 
the little holes perfectly (tiny hole in fuel line circle connector 
to tiny hole in fuel injector)
Denis Setwyn
#2305

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .



To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>