Re: [DMCForum] Re: 2767 tach pict
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DMCForum] Re: 2767 tach pict
- From: "Andrei Cular" <andreic@xxxxxxxxxxxxxxxxxx>
- Date: Thu, 8 Jan 2004 08:49:59 -0500
Problem is the IC is burnt and I can't read what it is to replace it.
Andrei
----- Original Message -----
From: "Samuel" <samuel_yahoo@xxxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 07, 2004 7:16 PM
Subject: Re: [DMCForum] Re: 2767 tach pict
If you are good with soldering, you could probably resolder some new lines
Andrei Cular wrote:
>I'm going to take it to the speedo shop tomorrow and see what they can do.
>My Delorean budget is just about used up for the next two months.
Hopefully
>they can match it up to a common and inexpensive part. If not I have a 3"
>VDO that I can screw to the binnacle Now if only I could find my angle
>drive shaft..
>
>
>
>Andrei
>
>
>
>----- Original Message -----
>From: "cruznmd" <racuti1@xxxxxxxxxxxx>
>To: <DMCForum@xxxxxxxxxxxxxxx>
>Sent: Wednesday, January 07, 2004 10:22 AM
>Subject: [DMCForum] Re: 2767 tach pict
>
>
>
>
>>--- In DMCForum@xxxxxxxxxxxxxxx, "Andrei Cular" <andreic@xxxx> wrote:
>>
>>
>>>I put a couple pictures of my burnt tach under 2767_picts on the
>>>
>>>
>>yahoo site.
>>
>>
>>>
>>>Andrei
>>>
>>>
>>What a shame that you discovered this now. There were few tachs and
>>other gauges on Ebay not long ago. You probably could have picked one
>>up for cheap.
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>To visit your group on the web, go to:
>> http://groups.yahoo.com/group/DMCForum/
>>
>>To unsubscribe from this group, send an email to:
>> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>>
>>Your use of Yahoo! Groups is subject to:
>> http://docs.yahoo.com/info/terms/
>>
>>
>>
>>
>>
>
>
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/DMCForum/
>
>To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/DMCForum/
To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN