[doc] D on fire!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] D on fire!



Dear all,

I had my first DeLorean Fire today... luckily it was a
candle size fire that I managed to kill in 1 minute.

One of the Fan Fix fuse went into fire, forcing me to
stop on the motor way, opening the fuse compartment
board, and blowing with my mouth like going mad!

http://www.deloreans.co.uk/Temp/PICT0084.JPG
http://www.deloreans.co.uk/Temp/PICT0085.JPG

I suppose Hong Kong is too damn hot, so that the
radiator fans are running more or less constantly...
putting hight current throught those two poor little
wires. A proper fan fix is needed asap!

Check your fuse connections and make sure they are
clean guys~ Don't let your D get too hot!

Regards,
John Tien
DOC 8
RHD 3046

P.S. Ian, I don't think I can make it tomorrow
morning... as the D need a rest + proper fix before
going any where! :(


--- Phill Wright <psw@xxxxxxxx> wrote:

> Hiya..
>
> off-the-peg at halfords - £14 mine cost ... but DMUK
> have em for a
> tenner -
>
http://www.delorean.co.uk/DMUK/newparts1.html#washerpump
>
> You'll more than likely find that the hose leading
> to it has gone
> hard as well, so you might want to get a short piece
> of new hose (the
> larger of the 2 sizes my local car shop had in
> stock) and an in-line
> washer pipe joiner - cut the original hose back
> about 10 inches to
> where it is still soft and join a new bit on - if
> you want to be posh
> then fit an in-line non-return valve instead of the
> joiner and you
> won't have to wait 10 second before water gets to
> the jets every
> time :-) (wish I'd thought of that when I did mine)
>
> The bottle is a mare to get out and the tub it sits
> in even more of a
> mare to get back in, if you have access to a pit or
> a lift it would
> be a lot easier.
>
> Another tip .. when putting it all back in I had a
> job getting the
> washer bottle to stay in place while wrestling to
> get the holding tub
> back in place - solved that by lightly gripping the
> neck with a pair
> of mole grips to stop it dropping back down the
> hole.
>
> Hope it helps
>
> Phill W
> DOC 233
> VIN 6772(sorbet)
> Avantime (M4TRA)
> SERA (drat, still not heard about the cherished
> plate)
>
> --- In doc-uk@xxxxxxxxxxxxxxx, "mrvic20"
> <mrvic20@xxxx> wrote:
> > Hi
> >
> > I need a motor for the windscreen washer bottle
> motor as mine is
> > shot.  The delorean one screws in to the water
> container...is this
> the
> > same as on other uk cars...i think most just push
> in.
> >
> > I will have to order from dmch if not but would
> ideaklly like it
> > sooner.  Does anyone know where i could get one in
> the uk?
> >
> > any help appreciated
> >
> > Craig DOC 388
> > VIN 6723 (Nearly ready for MOT)
>
>
>
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to
> the group are assumed public and may be printed in
> the club magazine **
> Yahoo! Groups Links
>
>
>     doc-uk-unsubscribe@xxxxxxxxxxxxxxx
>

>
>
>



           
___________________________________________________________
How much free photo storage do you get? Store your holiday
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com


DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated