[doc] Cluth Bleeder....

["Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>]

Hi all thought this link from the DML was a great idea for those of 
you who have the manual  and about time too:)

Looking froward to seeing you all on Monday ....hope the waeter 
holds up :)

Regards

Mike
403/#2001



Group,
As you know it has been discussed several time about how hard it is 
to
get to and bleed the clutch fluid through the slave cylinder.
Well it's done, The unit has been built tested and parts ordered and
will be ready to ship in about 10 days. I am making them with an
industrial grade valve, Stainless Steel hose with Teflon inner liner
and a modified bleeder screw that screws into the slave cylinder.
Take out the old bleeder screw and screw in the new one and tighten
with the nut. No special tools and leave it installed.
If you have any question, feel free to call. If it's ordered with the
clutch kit you can take off $5.00.
972-564-9321
John Hervey

http://www.specialtauto.com/delorean-parts/clutch-transmission.html





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.