[doc] Re: Riv-nut tool & measurement required

["saalexander2000" <stuartalexander@xxxxxxxxxxx>]

Hi James,

Just had a look at mine.  Before I looked I would have said that there
was no gap at all but looking closely its about 5mm at the side and up
to 1cm at the top!  You really have to look closely to notice though.
 Perhaps it's more obvious with a grey interior.  Hope this helps.

Also I've finally got round to doing my console switches with your
stickers.  I'm repainting them now before the stickers go on, look
good so far.

Stuart

#16686


--- In doc-uk@xxxxxxxxxxxxxxx, "jamesrguk" <James_rg@xxxx> wrote:
> 
> Hi all, 
> 
> My retrim is going well but I need a bit of help. 
> 
> My center consol is now back in, but the bit down in the foot well 
> sticks out on either side a bit too much, it has always been like 
> that, but I do have a cunning plan, which requires the use of a 
> rivnut tool.
> 
> So firstly....... 
> 
> Does anyonw know where I can buy or borrow a riv-nut tool? I would 
> probably prefer to buy as I have anumber of riv-nuts that need 
> replacing.
> 
> Secondly........
> 
> How much gap does your DeLorean have arouund the centre consol. if 
> you take a look at the pic in the photos section called 'centre_in1' 
> you will see what I mean. perhaps somone could take a look at 
> their's and let me know.
> 
> Thanks all
> 
> 
> 
> James RG





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.