[doc] Re: Mirror Switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Mirror Switch
- From: Jan van de Wouw <delorean@xxxxxxx>
- Date: Tue, 17 Aug 2004 21:20:59 +0200
On Tue, 17 Aug 2004 10:31:34 -0000, "Declan Gantley" wrote:
> Just going through the electric on my doors yesterday , when I was
> testing the switch for the mirrors I was getting continiuty for the
> downward position on both mirrors from the same connection , there
> are only 8 connections on the switch , 7 directional and one ground
> (black), should there not be eight?, there are still 2 not connected
There are only 8 connections, that's correct; one positive, one ground
and three from each mirror... The switch is constructed in such a way
that you can only adjust one direction at a time, not "diagonal".
Because of that they were able to connect the two motors in each
mirror together, saving an extra wire in the harness...
The switch for choosing which side you want to adjust only switches over
two sets of wires; those that are NOT connected together in the mirrors...
If you take a look at the schematic you'll see what I mean...
JAN van de Wouw
Thinking Different... Using a Mac...
Living the Dream... Driving a DeLorean...
#05141 "Dagger" since Sept. 2000
--------------------------------
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN