Re: [doc] re-fitting rear speaker panels

["Mike Bosworth" <mike.bosworth@xxxxxxxxxxxxxx>]

..that is if you managed to get them off in the first place with no 
little mishaps :)

I stuck mine back on with a bit of contact adhesive along the edge  
and whilst it was drying held it on with a pretty little row of 
coloured clothes pegs :)

It cant be as difficult to remove these panels now than the 
structural welding process they used to origionally fix them on :)

Regards

Mike
#2001
403



  




--- In doc-uk@xxxxxxxxxxxxxxx, Daniel Shane <dan@...> wrote:
>
> Chris
> 
> The only problem with impact adhesive is the next time you come to 
remove
> the panel you will rip them.
> 
> The vinyl will go back with the heat gun.  Just heat the vinyl 
until
> pliable, bend it over the edge of the door surround and let it 
cool.  Hold
> it in place whilst it cools if you want with a cloths peg.
> 
> Dan
> 
> 
> On 16/5/06 08:47, "Richard Hutchinson" <dickyh11@...> wrote:
> 
> > You should, of course, test whatever glue you use on a small 
area to
> > make sure it doesn't affect the trim :)
> > 
> > Rich H
> > DOC 365 VIN 1274
> > 
> > 
> >> -----Original Message-----
> >> From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On 
Behalf
> > Of
> >> Richard Hutchinson
> >> Sent: 16 May 2006 08:37
> >> To: doc-uk@xxxxxxxxxxxxxxx
> >> Subject: RE: [doc] re-fitting rear speaker panels
> >> 
> >> Use an impact adhesive like Evo-stick. Spread on both surfaces, 
allow
> > to
> >> tack dry, then press together
> >> 
> >> The heat gun won't affect it that much although it might dry a 
little
> >> more quickly
> >> 
> >> Rich H
> >> DOC 365 VIN 1274
> >>
>







------------------------ Yahoo! Groups Sponsor --------------------~--> 
You can search right from your browser? It's easy and it's free.  See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/