[doc] faulty ecu help?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] faulty ecu help?



hi

finally getting to the root of my running problems.
now have intake manifold reinstalled. car did the same, ran for 30
secs then gets bogged down and stalls but if i remove the idle speed
motor cable, then the car idles ok at 1800 revs.
so to fault find do i need to check the earth to the ecu, the diode,
the feed from the coil and the motor and the ecu.
i connected the cable back, statred and engine started to stall
after 20 seconds, i then pulled the cable of and engine slolwy
picked back up to 1800 revs.
therefore is the idle speed motor working but the ecu is feeding it
duff info and making it too lean or rich?
anyone any good ideas? and Martin, if i parcel posted the ecu to you
are you able to fully test? or plug into another car?. if i was near
you i'd book the car in1.

thanks for any help.

regards

steve





DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




SPONSORED LINKS
Recreation Automotive Sports
Delorean part Delorean cadillac


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated