Re: [doc] Painting Windscreen Frame - 3 Pieces
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Painting Windscreen Frame - 3 Pieces
- From: Martin Gutkowski <martin@xxxxxxxxxxxxxx>
- Date: Mon, 28 Nov 2005 11:18:01 +0000
See my top line again:
"Plasticote Satin black and plasticote metal primer."
Absolutely these must be primed, and only the side ones are ally, the
top one is stainless. This was a job I did on my own car when it arrived
in 2001 and now 15,000 miles ago. The only chips in the paint are 1)
where I dropped a screwdriver on it 5 minutes after re-fitting them
(grr) and 2) a couple of stone chips at the top centre.
Martin
simonsays10002003 wrote:
>--
>hi i thought these strips were aluminum if this is so the most
>important thing to remember is to etch primer them first if you dont
>the paint will just be sticking to the invisible oxidisation and
>will simply eventualy start to come off it will certainly stone chip
>really easy you then have todo it all again.dont bodge these cars
>lads there worth more than that.
>
>- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
>
>
>>Plasticote Satin black and plasticote metal primer.
>>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
SPONSORED LINKS
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN