[doc] Re: Tools, Your Friends
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Tools, Your Friends
- From: "andrew986186" <andy@xxxxxxxxxxxxxx>
- Date: Wed, 16 Nov 2005 21:35:29 -0000
i must admit, this made me laugh!
stiff
--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
>
> Oh this is a corker. Anyone who works on their car (or has ever
built
> a robot for that matter - Rich H & J, I'm looking at you!) will
love
> this! I've added a couple to the bottom. I've also translated a
couple
> of them into "British" :-)
>
> (thanks to Ryan off the DMCForum for this)
>
> Martin
>
> -------- Original Message --------
>
> The True Definition Of Tools
>
> PILLAR DRILL: A tall upright machine useful for suddenly snatching
flat
> metal bar stock out of your hands so that it smacks you in the
chest
> and flings your beer across the room, splattering it against that
> freshly painted automobile part you were drying.
>
> WIRE WHEEL: Cleans paint off bolts and then throws them somewhere
> under the workbench with the speed of light. Also removes
fingerprint
> whorls and hard-earned guitar calluses in about the time it takes
you
> to say,
> "Ouch...."
>
> ELECTRIC HAND DRILL: Normally used for spinning pop rivets in their
> holes until you die of old age.
>
> PLIERS: Used to round off bolt heads.
>
> HACKSAW: One of a family of cutting tools built on the Ouija board
> principle. It transforms human energy into a crooked, unpredictable
> motion, and the more you attempt to influence its course, the more
> dismal your future becomes.
>
> MOLE-GRIPS: Used to round off bolt heads. If nothing else is
> available, they can also be used to transfer intense welding heat
to
> the palm of your hand.
>
> OXYACETYLENE TORCH: Used almost entirely for lighting various
> flammable objects in your shop on fire. Also handy for igniting the
> grease inside the wheel hub you want the bearing race out of.
>
> WHITWORTH SOCKETS: Once used for working on older British cars and
> motorcycles, they are now used mainly for impersonating that 9/16
or
> 1/2 socket you've been searching for the last 15 minutes.
>
> HYDRAULIC FLOOR JACK: Used for lowering an automobile to the ground
> after you have installed your new brake shoes, trapping the jack
> handle firmly under the bumper.
>
> EIGHT-FOOT LONG DOUGLAS FIR 2X4: Used for levering an automobile
> upward off a hydraulic jack handle.
>
> TWEEZERS: A tool for removing wood splinters.
>
> PHONE: Tool for calling your neighbor to see if he has a tool for
> getting dog **** off your boot.
>
> SCREW EXTRACTOR: A tool ten times harder than any
> known drill bit that snaps off in bolt holes you couldn't use
anyway.
>
> TWO-TON ENGINE HOIST: A tool for testing the tensile strength on
> everything you forgot to disconnect.
>
> CRAFTSMAN 1/2 x 16-INCH SCREWDRIVER: A large prybar that
inexplicably
> has an accurately machined screwdriver tip on the end opposite the
> handle.
>
> TIN SNIPS: See hacksaw.
>
> LEAD LAMP: The home mechanic's own tanning booth. Sometimes called
> a drop light, it is a good source of vitamin D, "the sunshine
> vitamin," which is not otherwise found under cars at night. Health
> benefits aside, it's main purpose is to consume 40-watt light
bulbs at
> about the same rate that 105-mm howitzer shells might be used
during,
> say, the first few hours of the Battle of the Bulge. More often
dark
> than light, its name is somewhat misleading.
>
> PHILLIPS SCREWDRIVER: Normally used to stab the lids of old-style
> paper-and-tin oil cans and splash oil on your shirt; but can also
be
> used, as the name implies, to strip out Phillips screw heads.
>
> AIR COMPRESSOR: A machine that takes energy produced in a coal-
burning
> power plant 200 miles away and transforms it into compressed air
that
> travels by hose to a Chicago pneumatic impact wrench that grips
rusty
> bolts last over-tightened 50 years ago by someone at Ford, and
neatly
> rounds off their heads.
>
> PRY BAR: A tool used to crumple the metal surrounding that clip or
> bracket you needed to remove in order to replace a 50 cent part.
>
> HOSE CUTTER: A tool used to cut hoses too short.
>
> HAMMER: Originally employed as a weapon of war, the hammer
nowadays is
> used as a kind of divining rod to locate the most expensive parts
not
> far from the object we are trying to hit.
>
> MECHANIC'S KNIFE: Used to open and slice through the contents of
> cardboard cartons delivered to your front door; works particularly
> well on contents such as seats, vinyl records, liquids in plastic
> bottles,collector magazines, refund checks, and rubber or plastic
> parts -- also skin.
>
> DAMMIT TOOL: Any handy tool that you grab and throw across the
garage
> while yelling "DAMMIT" at the top of your lungs. It is also the
next
> tool that you will need.
>
> EXPLETIVE: A balm, usually applied verbally in hindsight, which
> somehow eases those pains and indignities following our every
> deficiency in foresight.
>
> -------
>
> One omission - Angle Grinder.: Used mainly to burn neat holes in
whichever
> part of your clothing is nearest to the object being ground, and
to remove
> fingernails.
>
> And the LEAD LAMP should include the bit about pointing everywhere
> except in the direction you actually want to look at something
(usually settling
> on "strait in your eyes" instead)
>
>
>
> Martin
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
YAHOO! GROUPS LINKS
Back to the Home of PROJECT VIXEN