Re: [doc] DPNW Door Actuator Upgrade Wiring

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

 If it works on the original lock module, it'll work with a Lockzilla, 
unless the lockzilla is poorly designed (needle, needle :-)

Just a quick plug - our re-wound solenoids work a treat, and are cheaper 
than Toby's kit, and keeps things original.

We re-wind them with a slightly heavier gauge wire rated to 
170-something degrees C so it will take a lot to burn one out. Must not 
be used with a stock lock module.

Martin

Alistair McCann wrote:

> Hi all
>
> Has anyone fitted this to their car??
>
> Does the wiring change if you have the zilla lock module instead of 
> the original module??
>
> Alistair McCann
> DOC 25
> VIN# PILOT25
>
> [Non-text portions of this message have been removed]
>



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.