RE: [doc] Valley Of Death........
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] Valley Of Death........



I spent a couple of hours in there getting loads of slurpy mud and other
rubbish out of the holes to get them perfectly clean.

Then I filled them up with Waxoyl. It hardens to a nice waxy texture
which could be scraped out if needed but which prevents all the crud
filling them up again.

Have had no problems with it, other than the initial smell(which fades)
and it does go very watery the first few times, if you over fill, it
trickles onto the pulley and sprays around the engine!

Rich H
DOC 365 VIN 1274


> -----Original Message-----
> From: Mike Bosworth [mailto:mike.bosworth@xxxxxxxxxxxxxx]
> Sent: 22 December 2004 10:44
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] Valley Of Death........
>
>
>
> Hiya All
>
> Whilst im in there replacing all my hoses etc. With regards to those
> 4" deep holes in the engine casting, in my case full up with
> sand! ...Does anyone know of a good product to fill these up to
> prevent any future damage from water etc, or is this not a good idea??
>
> Regards
>
> Mike
> #2001
> doc403
>
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.806 / Virus Database: 548 - Release Date: 05/12/2004
>



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **



Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated