Re: [doc] Hood (or bonnet) 'popping' up when released

[Martin Gutkowski <webmaster@xxxx>]

 Is the same true for the engine cover? Mine doesn't "pung" either...

Thanks

James

James Espey wrote:

> Early cars were fitted with a spring that didn't properly release the hood -
> this was the subject of an unpublished, and therefore, relatively unknown
> service bulletin. A new spring (Part #110279) was issued and fitted on most
> of the later cars. It can be easily fitted to any car. Available from any of
> the vendors for less than $3, I believe.
>
> James Espey
> DeLorean Motor Company
> Houston, Texas
>
> 281/568-9573
> 800/USA-DMC1
> http://www.delorean.com
>
> > From: Martin Gutkowski <webmaster@xxxx>
> > Reply-To: doc-uk@xxxxxxxxxxxxxxx
> > Date: Thu, 13 Dec 2001 00:07:26 +0000
> > To: doc-uk@xxxxxxxxxxxxxxx
> > Subject: Re: [doc] High Hood
> >
> > Does yours pop up properly when you pull the lever? Mine doesn't and I
> > reckon compressing the seals a bit moreby dropping the latch might help.
> >
> > Martin
> > #1458
> >
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/