From: eGroups Digest [dmcnews@egroups.com] Sent: Tuesday, July 27, 1999 8:42 AM To: David.Swingle Subject: dmcnews digest eGroups Daily Digest: dmcnews has 11 new messages. Click here http://www.eGroups.com/list/dmcnews/?start=1834 to read them. ----------------------------------------------------------------- 1834. Marc A Levy Re: Stainless Steel Cleaners 1835. Fedeli, Joe Re: Snow Driving 1836. Watkins Family Steering wheel aligment 1837. Marc A Levy Re: Looking For A Few Things 1838. Watkins Family Torsion bar appearance 1839. delorean502@excite.com delorean club? 1840. James Espey Seeking original DMC sheepskins 1841. Mike Cutting Re: dmcnews digest 1842. NELLYMAC1@aol.com Re: Stainless Steel Cleaners 1843. Watkins Family Loud rear-end Clunking/Banging 1844. Dave Swingle Re: Steering wheel aligment ----------------------------------------------------------------- ------------------------------ message 1834 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1834 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 08:37:44 -0400 From: Marc A Levy MIME-Version: 1.0 References: <379BCE6D.52C585AA@ccomm.com> <379B8B15.605EF380@magicnet.net> Subject: [DML] Re: Stainless Steel Cleaners Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I am surprised that NetCare would darken the color if it is truly a water based product. Most of the cleaners I have tried are Oil based, and I am very unhappy with the results. The oil film left over darkens the color, and attracts dust and pollen. I would guess that NetCare (I have never used this product) does have some oil in it. I have used a cleaner by "Sysco" that is water based, but has oil in it. While it is not as bad as the totally oil based products, it still leaves a oil film behind. The WORST cleaner I have found had been the "Zep" Product sold at Home Depot. (I have 2 cans of it, if anyone wants them!) As far as washing the car goes, I have used some mild abrasive cleaners, and powders. All seem to work the same, and very well. The drawback is that they require water. I would love to have a aerosol spray that can be used at car shows. Michael Pack had some stuff that worked well and the DeLorean Mid Atlantic door adjustment this year, but I have been unable to find the stuff anywhere myself. Until I find something better, I am going to stick with the mild abrasive cream/powders, and Windex for fingerprints at shows. When I purchased my delorean, I purchased a bottle of cleaner from PJGrady. He said it was what was used for dealer prep back in 81. I still have not tried it, because I am not sure how to "use" it. I also purchased some aerosol cleaner from him. As far as the aerosol cleaners go, it is one of the better ones I have tried but it still leaves a bit of oil behind. Has anyone used the "secret Formula" sold by DMC Houston? It was mentioned in one of their mailings commercial mailings, but that was the last I heard of it. ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1835 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1835 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ From: "Fedeli, Joe" Date: Mon, 26 Jul 1999 08:45:30 -0400 MIME-Version: 1.0 Subject: [DML] Re: Snow Driving Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit GREAT...I've done it...no problems. -----Original Message----- From: ryan arsenault [mailto:rybeth@flash.net] Sent: Monday, July 19, 1999 10:26 AM To: dmcnews@egroups.com Subject: [DML] Snow Driving Hi list, I always wondered how well a DeLorean performed in snow? I realize how low to the ground they are, so if there are eight inches of snow on the ground wouldn't it get stuck? ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1836 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1836 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 08:57:08 -0400 From: Watkins Family MIME-Version: 1.0 Subject: [DML] Steering wheel aligment Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit With advise from Joe at DMC services I successfully replaced my steering column bushing! I have only one minor problem. I"m afraid to ask this BUT.........I didn't quite line up the column spline with the upper universal joint when reinstalling the column and now the steering wheel is a tad off center when traveling perfectly straight. Please don't tell me I have to remove the column again ( taking off trim pads etc...) to get the wheel straight as dealing with the collapsing bar was a challenge. Trying to get it through the new bushing wasn't easy without it pushing in. I finally took a small vise grip and put it on the bar so it would stop it from going all the way up into the braided area. I think I can loosen up the lower joint and take out the pin on the upper and slid it down and then move the wheel to the proper position. The intermediate bar wouldn't slide down due some minor (repeat minor) surface rust. but if this procedure will work I'll attempt to make it slide down witha little TLC. The other question is.....If you remove the center steering wheel pad there is a large nut holding the wheel onto the column. Can this be loosened up and reposition the steering wheel this way?? I don't think, so but it's worth asking. Thanks Joe for the help!!!!!! Tom Watkins #5732 ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1837 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1837 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 08:39:31 -0400 From: Marc A Levy MIME-Version: 1.0 References: Subject: [DML] Re: Looking For A Few Things Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Does this item exist? I have a gray interior, and pretty sure I have a black shift boot. Paraversal@aol.com wrote: > > Im just looking for a few minor parts for my DMC. If anyone has one of these > and is willing to part with it, please contact me personally. Parts are as > listed below: > ---Gear Shift Leather Boot (Grey) ...willing to trade for a new Black > leather boot? > ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1838 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1838 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 09:04:45 -0400 From: Watkins Family MIME-Version: 1.0 Subject: [DML] Torsion bar appearance Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit My torsion bars have some light rust looking odd brown spotting color on them. It's not that bad but it looks dirty when I open my doors at car shows. I know not to touch the bars with anything, as any scratched or nicks can cause that awful BANG!!! sound to possibly happen! My question is..... Can the bars be painted with anything to cover up this discoloration? Perhaps a small brush and some silver Krylon sprayed into a cup and then applied? I know the bars need to twist but I would like any opinions on what possible options ther might be. The bars work great and I would rather avoid buying new ones just for some discoloration. Thanks Tom Watkins #5732 ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1839 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1839 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 11:04:47 -0700 From: delorean502@excite.com Subject: [DML] delorean club? Content-Type: text/plain Content-Transfer-Encoding: 7bit does anybody know of a Delorean club in Michigan? i live in west michigan and want to get together with some other Delorean owners. if there isnt a club, does somebody want to help me start one up? thanks erik geerdink VIN 4512 PLATE EGGS D ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1840 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1840 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Mime-Version: 1.0 Date: Mon, 26 Jul 1999 17:22:06 -0500 From: James Espey Subject: [DML] Seeking original DMC sheepskins Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I am in need of a photogrpah of the original DMC sheepskins covers, the embossed plastic buckle in particular. If you a set, please contact me directly at: james@usadmc.com Thank you. James Espey DeLorean Motor Company Houston, Texas 281/568-9573 800/USA-DMC1 http://www.usadmc.com ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1841 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1841 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ From: "Mike Cutting" References: <199907241117.HAA18601@ns1.nt.net> Date: Mon, 26 Jul 1999 19:27:08 -0400 MIME-Version: 1.0 Subject: [DML] Re: dmcnews digest Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit greetings.. i remember this being mentioned, so, i appologise for re-posting this question, but i checked the archives, and couldn't find the answer... i am picking up my d in 8 days (1982, #11434 - Grey Int, 5 Spd), and i was wondering.. is there still a car cover available for our cars?? i seem to remember someone mentioning, a few months ago, that they bought one from wal-mart (delorean was listed on the side of the box apparently as being one of the many cars that the cover fit).. i went there, and had no luck.. any help would be greatly appreciated.. also.. how does one adjust the position of the steering column? btw, if there are any other d's in northeastern ontario (canada), pls let me know.. i am aware of only one other, and it's in timmins. thanks for the help.. :) mike cutting ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1842 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1842 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ From: NELLYMAC1@aol.com Date: Mon, 26 Jul 1999 19:43:22 EDT MIME-Version: 1.0 Subject: [DML] Re: Stainless Steel Cleaners Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I always use Vanish liqid (with bleach) and really hot water and them a buff with Mr Sheen which takes care of fingerprints but its hard going , I sujest a six pack, a fake sore back and a loving wife Neil ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1843 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1843 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ Date: Mon, 26 Jul 1999 20:02:16 -0400 From: Watkins Family MIME-Version: 1.0 Subject: [DML] Loud rear-end Clunking/Banging Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I had a front end alignment today. All went well, except that I now have a loud clucking/whapping sound coming from the Driver rear axle. This happened last year and it turned out to be some of the rear axle bolts had come loose. with this knowledge, I looked underneath and lo and behold several of the bolts on the tire side near the boot had come loose. I tightened them up and figured that would be that.......Wrong. I went for a sunset drive tonight and all of a sudden...wap,wap, wap, upon acceleration. I nursed it home, and at one point sounded like it has stopped but then reappeared. I know the bolts are tight and I know that clunking as you turn is a common problem but does anyone know what I'm up against? All was fine until the front alignment....The guy didn't even go near the rear end of the car so it can't be anything he did. I searched the archives for this but mostly found the above mentioned clunking issue. I'm supposed to go to Rob's in August from Maine to New York. I'm concerned this may be a more serious problem than I may be aware of. For now, my car is in the barn until I can figure it out. Any help or advise would be appreciated! Thanks All Tom #5732 ------------------------------------------------------------------------ To address comments privately to the moderating team, please address moderator@dmcnews.com ------------------------------ message 1844 ------------------------------ http://www.eGroups.com/list/dmcnews/?start=1844 X-Mailing-List: dmcnews@egroups.com X-URL: http://www.egroups.com/list/dmcnews/ From: "Dave Swingle" Date: Mon, 26 Jul 1999 20:26:01 -0500 MIME-Version: 1.0 Subject: [DML] Re: Steering wheel aligment Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Tom Watkins #5732 Wrote: > With advise from Joe at DMC services I successfully replaced my steering > column bushing! ...now the steering wheel > is a tad off center when traveling perfectly straight. > I think I can loosen up the lower joint and take out the pin on the > upper and slid it down and then move the wheel to the proper position. > The intermediate bar wouldn't slide down due some minor (repeat minor) > surface rust. but if this procedure will work I'll attempt to make it > slide down with a little TLC. Refer to the manual H:05:01. You should be able to slide the sections of the joint far enough up or down to get the intermediate shaft off of the rack or the steering column without removing either the steering column or the rack from the car. It may take a lot of penetrating oil on the spline shaft first. I have done it. Once you get it apart a little anti-sieze compound on the splines will make this easier for the next guy. A "sleazier" way to fix your problem is to re-align the tie rod ends, but you'd be in danger of having the car be able to turn tighter in one direction than in the other since the straight-ahead postion would no longer be in the center of the rack. Probably not a good idea. > The other question is.....If you remove the center steering wheel pad > there is a large nut holding the wheel onto the column. Can this be > loosened up and reposition the steering wheel this way?? I don't > think, so but it's worth asking. This is a very difficult procedure. There are puller holes in the steering wheel but they are so small that they are guaranteed to strip out before you get the wheel off the car. They are also an impossible-to-find metric size/length. The wheel is loc-tited to the column, so its very hard to remove without hammering on the column or heating it, which causes other problems. I'd try to get the lower end apart. dave ----------------------------------------------------------------- -- View the full archives, subscribe/unsubscribe, use the group calendar at http://www.eGroups.com/list/dmcnews Manage your subscriptions at http://eGroups.com Free e-mail groups by eGroups.com. 
This site contains affiliate links for which we may be compensated