Re: [DML] WHAT MECHANICAL SYSTEM ADJUSTMENTS REQUIRED WHEN INSTALLING FR
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] WHAT MECHANICAL SYSTEM ADJUSTMENTS REQUIRED WHEN INSTALLING FRONT CALIPERS??





What he may be referring to is the piston needing to be depressed.  This is usually the case when disks and or pads are replaced and the calipers are reused.  The pistons need to be pushed back in to get it all to fit.  The only thought is on the pins that the calipers slide on can be greased with brake appropriate grease (High temp grease).


Tom wrote , ----On 4/16/2014 12:21 PM ---------------------------:
 

Since I don’t see any replies yet, so I’ll be the first one to chime in.
 
Mike, I have never heard of any “pin” that needs to be depressed. I can’t even think of any pin anywhere that might need to be depressed. There is absolutely no reason for new or rebuilt calipers to seize unless there is something wrong with them.
I can’t think of any reason why your brakes would seize while replacing the clutch. Those are separate systems and one does not affect the other.
 
Brake calipers seize when not used for a long time and when the brake fluid isn’t changed – corrosion forms around the pistons and they seize. Again, there’s no magic pin. The brake system on our cars is very simple and there are no special tricks needed.
Just make sure you bleed the system correctly and don’t worry about it.
 
One area that might need some adjustment is the automatic adjusters for the parking brake. Still, there is no pin and the brakes will not seize. If you do not move the adjuster there might not be enough room for new parking brake pads to fit on the rotor.
Do you have the shop manual?
 
Good luck!

Greetings from Poland!
Tom Niemczewski
Vin 6149 plus 2418, 3633, 5030, 16473, 17086
Google earth: 52°25'17.66"N, 21° 1'58.40"E
www.deloreana.com
 
 
Sent: Saturday, April 12, 2014 7:58 PM
Subject: [DML] WHAT MECHANICAL SYSTEM ADJUSTMENTS REQUIRED WHEN INSTALLING FRONT CALIPERS??
 


Can anyone tell me if there are any "adjustments" that need to be made when installing brake calipers??  I have just rebuilt my front brake calipers and am ready to reinstall them.   It's been a while but I vaguely remember something about a "pin" mechanism somewhere that needed to be depressed when doing brake or clutch work, else the brake calipers would seize.  I had my clutch replaced years ago and somehow the brakes got seized up from the work and I remember telling the mechanic about the "pin" thiing that needed to be depressed?  I forget the details now.  Sorry not much to go on, but I am fairly certain that when I reinstall my front calipers they will immediately seize up without the "pin" step being followed?

Thanks,
Mike
#5781



__._,_.___


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews





__,_._,___


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated