--- In dmcnews@xxxxxxxxxxxxxxx, "Matthew" <drivestainless@...> wrote: > > Group, > > After reading so often that the hood should be removed when removing the front fascia, I finally attempted it myself. As luck would have it, I had one of these: > > http://www.newfroggy.com/images/detailed/1/Z-Shape_Offset_Screwdriver_%283pc_set%29.jpg > > This tool gave me plenty of space to remove the screws while leaving the hood in place. All of them came out easily. I assume this is because the speed-clips are stainless. > > Matt > One of those takes too long to use :-) . I use one of these for tight spaces. http://www.summitracing.com/parts/wmr-w38915 ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/