Do the Borgeson U joints fit on a stock lower steering column (or whatever it's called)? My lower U joint does have a rattle and is tempting to just replace the rattling U joint with a vibration reducing U joint. -Steve Rice #16510 On Wed, Jun 13, 2012 at 9:36 AM, content22207 <brobertson@xxxxxxxxxxxx> wrote: > Not according to Borgeson. Gil claims Toby is ordering Part #113412, which is a straight U joint. Vibration reducing U joint would be Part #154912 (DD shaft). > > Putting the flex coupling in the middle of the column is not 100% optimal (I'll show you why at DCS), so I am going to try a pair of vibration reducing U joints on my next column. > > Stainless vibration reducing U joints do cost $41.03 more than straight U joints, but a pair of them is still $29.22 less than a rag joint (if they do in fact work as advertised). > > Bill Robertson > #5939 > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/