Re: [DML] Modifications to Byrne's LCA's (Ball Joints)

["content22207" <brobertson@xxxxxxxxxxxx>]

I cut my screwdriver slots at the same time I was drilling the ball joints for grease fittings. I found it easy to do both while the arms were loose on my workbench. Only took a couple of swipes with an abrasive wheel in my Dremel tool. 

Most ball joints come with screwdriver slots -- this is hardly an unusual modification.

Bill Robertson
#5939

--- In dmcnews@xxxxxxxxxxxxxxx, "Martin Gutkowski" <martin@...> wrote:
>
> The ball joint can be locked into the hub by putting a jack under the arm and lifting it. Then you can do the nut up. No modification necessary.
> 
> Martin
> 
> Sent from my BlackBerry®
> 
> -----Original Message-----
> From: "content22207" <brobertson@...>
> Sender: dmcnews@xxxxxxxxxxxxxxx
> Date: Wed, 02 May 2012 02:14:56 
> To: <dmcnews@xxxxxxxxxxxxxxx>
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> Subject: [DML] Modifications to Byrne's LCA's (Ball Joints)
> 
> I did make two modifications to Byrne's ball joints:
> 1) Cut screwdriver slots in the end of the stems to hold them still until they taper locked in the knuckles (the lock nuts want to spin the stems before they have taper locked)
> 2) Added grease fittings
> 
> Bill Robertson
> #5939
> 
> 
>  
> 
> 
> 
> 
> 
> ------------------------------------
> 
> To address comments privately to the moderating team, please address:
> moderators@...
> 
> For more info on the list, tech articles, cars for sale see www.dmcnews.com
> 
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/