The clip on the inside. You have to drop the pan. OR disconnect that wire at the top end, but if you are sending it in core exchange you should not do that. If you've managed to twist it, you need to go ahead and remove it as it will probably start leaking anyway. There is an o-ring on it that you'll need to replace. Dave S --- In dmcnews@xxxxxxxxxxxxxxx, <dmenkhaus@...> wrote: > > Trying to replace the automatic transmission computer (entire assembly) to fix my shifting issue. Got the big parts on the right (passenger) side of the trans off, no probelm. Cannot figure out how the wire that goes int the rear on the drivers side comes out. Looking at the new one, it looks like a simple counter-clockwise twist and pull, but although I can twist it easily enough, I cannot pull it out... > > What am I missing? > > TIA > > Doogie > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/