[DML] Re: Source for fuel distributor plunger o-rings

["Harold" <hmcelraft@xxxxxxx>]

The seals are $3.50 on Hervey's web site.

Harold McElraft - 3354

--- In dmcnews@xxxxxxxxxxxxxxx, Daryl Scott <daryl_scott32@...> wrote:
>
> Hi, 
> Where are there sources to get this o-ring? Should I use Viton? What size is it? I found a Danco o-ring at a Ace hardware that appears to fit and work (5/16 X 3/16 X 1/16). My fear is that I may not hold up to gasoline and the pressures in this system. I would like to find a place to buy several of these to have for spares without buying a kit.
> Thanks,
> Daryl 
> Vin 05017
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/