Re: [DML] Flipping Headlight Buckets Upside Down

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

On 16/11/2011 20:46, content22207 wrote:
> You have to cut two notches in the underbody, not the fascia, for the raised areas around the adjusting screws to nestle into. Only takes a minute or two with a Dremel tool. Before regular detractors' brains explode: you're at the edge of the underbody already and the notches are only 2 or 3 inches wide.
>
> Work smarter, not harder.
>

Now that's comedy right there.


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/