You may want to compare them with the figures Bitsyncmaster collected and posted on DMCTalk.com Welmoed. --- In dmcnews@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@...> wrote: > > Hello, > > > I have serviced my warm up regulator today. including cleaning dirty screen and ambient air pipe was clogged. > > I have the following data, wondering if someone could give it a once over. > note: new fuel pump and boot along with tank cleaned out yesterday > > 1. heater voltage - good > *** voltage when car is running > > 2. heater resistance - 18.7 ohms > *** later testing shows slow and constant pressure rise on cold engine started to 3.8 bar upon plugging in. > > 3. rest pressure - good > *** after running pump on cold engine from rpm relay, then shutting pump off > > 3.00 bar @ 8:39 > 2.75 bar @ 8:42 > 2.68 bar @ 8:49 > 2.55 bar @ 8:56 > > 4. closed pressure > **** with pump running, no engine, engine cold > 70psi / 4.8 bar > > 5. open pressure > **** with pump running, no engine, engine cold > 36psi / 2.5 bar > > 6. open pressure warm engine running , no vacuum to WUR > 3.7 bar > > 7. open pressure warm engine running 13.3hg through 16.2hg vacuum to WUR > between 1.7 to 1.8 bar > > 8. vacuum delay valve test on delay valve from 16hg down to 8 hg > 10 seconds > > any thoughts on this > > thanx > > > Jordan Rubin > > > > "Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt!!" > > > > http://www.mydelorean.net > > http://www.youtube.com/profile?user=jcrubin78 > > > > > [Non-text portions of this message have been removed] > ------------------------------------ To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dmcnews/join (Yahoo! ID required) <*> To change settings via email: dmcnews-digest@xxxxxxxxxxxxxxx dmcnews-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/