[DML] Re: air con does'nt work

["thefrewe" <terryfrewen@xxxxxxxxx>]

Try this http://www.delorean.com/store/p-7759-mode-control-switch-rebuild-kit.aspx

Mine did that too when i first bought it.  It wouldn't switch from the floor to the panel to the dash vents.  

Terry
11572

--- In dmcnews@xxxxxxxxxxxxxxx, lordshill@... wrote:
>
> 
> Hello all..  I'm having a problem with my A/C.  The system is fully charged and the cold air goes to the floor but will not come out of the dash vents.  Probably a vacumn hose problem..Any ideas as to where to start.  Also does anyone have the correct bulb numbers for the front turn signals and the correct flasher unit number.  Thanks,
> Roy E Barley
> 0893
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: jtrealtywebspannet <jtrealty@...>
> To: dmcnews@xxxxxxxxxxxxxxx
> Sent: Mon, May 24, 2010 1:32 pm
> Subject: [DML] Re: air con does'nt work
> 
> 
>  
> 
> Most likely you are low on refrigerant because of leaks. The leaks are most likely from the hoses. It doesn't matter since when you replace the hoses you will also be replacing the "O" rings on just about all of the connections. One way to verify the low pressure switch is what is doing this because of low refrigerant is to stick a paper clip in it and jumper the plug for a moment to see the clutch on the A/C compressor engage. Do not run it for any length of time, just long enough to see it work. Then order a new set of hoses and you should also replace the accumulator/dryer. I like SpecialT's "split-hose", it makes installation SO much easier. You should also have the shop that you use to vacuum and recharge your system replace the oil in the system. Stay with R-12 or a drop-in substitute like R-414a.
> David Teitelbaum
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "Welmoed" <welmoedj@> wrote:
> >
> > Sufficient refrigerant?
> > 
> > Welmoed.
> > 
> > 
> > --- In dmcnews@xxxxxxxxxxxxxxx, "miller99501" <kamiller@> wrote:
> > >
> > > hi group
> > > Took the car out from its winter slumber and now the air conditioner doesn't work!! it worked just fine when I stored it. The pump turns but I notice it doesn't engage like it did before, I checked the fuse, its good, checked the low pressure side, its also good. 
> > > Any advise where to look now? 
> > > 
> > > thanks in advance
> > > Kevin
> > > 4556
> > >
> >
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/